PRODUCT CATALOG

Back to INDEX Key L=Latex | O=Alkyd/Oil | S=Other/Special Int=For Interior Use | Ext= Exterior Use Exterior Primers Exterior Primers--Previously Painted Poured/ Precast Concrete, Cement/Cinder Block, Stucco Code Product Name Type 100 Fresh Start® Penetrating Alkyd Sealer Primer O 024 Fresh Start® All Purpose Alkyd Primer O 169 Super Spec™ Latex Exterior Primer L 023 Fresh Start® All Purpose 100% Acrylic Primer L 176 Super Spec Alkyd Exterior Primer O 066 Moore's Acrylic Masonry Sealer L C077 Moore's Alkyd Masonry Sealer O

These profiles are abstracts of the complete Product Technical Data Sheets, which contain detailed product information and are available (PDF format) by clicking on the Technical Data Sheet (pdf) links. They are also available from your Benjamin Moore Representative or local authorized Benjamin Moore dealer. Quality level descriptions, from good to best, are: Economy, Very Good, Excellent, Premium Please note that not all Benjamin Moore products are available in all areas. Some products may also be formulated differently in your area due to local regulations. Benjamin Moore has a policy of constant product improvement, and some information in this manual, while accurate at time of printing, may now be out of date.      Fresh Start All Purpose 100% Acrylic Interior/Exterior Latex Primer 023 Back to INDEX MSDS Top of Page Technical Data Sheet (pdf) A premium quality, 100% Acrylic interior/exterior primer formulated for sealing and suppressing most bleeding type stains including: crayon, graffiti, grease marks, water stains, cedar and redwood bleed, asphalt, creosote, rust and smoke. Can be used over existing oil or latex paint and performs equally well under all of Benjamin Moore's architectural finish coat products, oil and latex. For interior use on new or previously painted wood, plywood, drywall, ceiling tile, Formica¬, Masonite¬, ceramic tile, and cured plaster. For exterior use on new or previously painted wood, aluminum and hardboard siding, shingles, shakes, concrete, masonry, brick and metal surfaces. Colors Available: White* Use Interior/Exterior Gloss Level Flat Type 100% Acrylic Clean Up With Water -   Provides a total latex system, offering excellent resistance to blistering on new construction. -   Easy to apply. -   Excellent hiding and leveling properties. *May be tinted with up to 2.0 fl. oz. of Benjamin Moore colorants per gallon.

Moore's Acrylic Masonry Sealer 066 Back to INDEX MSDS Top of Page Technical Data Sheet An acrylic latex sealer for sealing new and previously painted masonry surfaces prior to applying a finish coat. Bonds and seals to provide a sound undercoat as part of a complete waterproofing system using Moorlastic Elastomeric Waterproofing Coating - Low Lustre (055) or Flat (056) - for the topcoat.

Colors Available: Clear and White*

Use Exterior Gloss Level Clear: Low Lustre White: Flat Type Acrylic Latex Clean Up With Water

-	Provides a sound undercoat.
-	Reduces the porosity of masonry surfaces.
-	Provides excellent surface adhesion.
-	Does not eliminate the need for adequate surface preparation.

Moore's Alkyd Masonry Sealer C077 Back to INDEX MSDS Top of Page Technical Data Sheet A penetrating liquid surface conditioner for exterior use on weathered masonry surfaces or previously painted and chalky masonry. Although designed primarily for latex paint topcoat, any paint may be used. In the case of gloss paints, two coats may be necessary to achieve full gloss. Not for use on new or fresh masonry. Alkali present in new concrete will inhibit the ability of Moore's Alkyd Masonry Sealer to provide adequate adhesion.

Colors Available: Clear and White*

Use Exterior Gloss Level Flat Type Alkyd Clean Up With Mineral Spirits

-	Reduces the porosity of masonry surfaces prior to top coating.
-	Provides excellent surface adhesion.
-	Does not eliminate the need for adequate surface preparation.

Moorwhite Primer 100 Back to INDEX MSDS Top of Page Technical Data Sheet (pdf) A premium quality long-oil, alkyd-based fast drying pigmented primer which provides a uniformly sealed surface that prevents absorption of vehicle from finish coat. It provides excellent hiding and leveling properties, and improves adhesion on weathered and prepared chalky surfaces. For exterior use on unpainted wood, cured masonry, and previously painted weathered surfaces including aluminum siding. Suitable for a variety of exterior surfaces such as sidewalls, trim, and shutters. May be used under latex or water-thinned paints, alkyd enamels, and house paints. For best results, top coat should be applied within a reasonable length of time--preferably no more than one month after priming.

Colors Available: White,* Red,* Gray,* and Deep Color Base. When tinted in accordance with Benjamin Moore prescriptions, Deep Color Base will provide a hiding base coat suitable for use under deep and intense colors.

Use Exterior Gloss Level Low Lustre Type Alkyd Clean Up With Mineral Spirits

-	Easy to apply by brush, roller, or spray gun.
-	Mildew resistant.

Moorcraft® Super Spec Latex Exterior Primer 169 Back to INDEX MSDS Top of Page Technical Data Sheet (pdf) An exterior alkyd modified acrylic blended latex primer intended for use under latex exterior house paints to provide a total latex system offering excellent resistance to blistering.  Use on both bare and previously coated siding and trim.  Ideal for exterior surfaces such as new or previously painted exterior wood, hardboard siding, cured masonry, aluminum and galvanized metal, and unglazed brick.

Colors Available: White*

Use Exterior Gloss Level Flat Type Acrylic Blended Latex Clean Up With Water

-	Provides a total latex system, offering excellent resistance to blistering on new construction.
-	Easy to apply.
-	Excellent hiding and leveling properties.

Moorcraft Super Spec Acrylic Exterior Primer 176 Back to INDEX MSDS Top of Page Technical Data Sheet (pdf) A premium alkyd based primer designed to penetrate and seal weathered surfaces uniformly and provide a non-gloss film for optimal finish coat performance.  For exterior surfaces such as new or previously painted wood, hardboard siding, cured masonry, and unglazed brick.

Colors Available: White*

Use Exterior Gloss Level Flat Type Alkyd Clean Up With Mineral Spirits

-	Excellent holdout and hiding.
-	Excellent adhesion.
-	Formulated to seal porous surfaces and improve bond over prepared chalky surfaces.

			Fresh Start® All Purpose Alkyd Primer 024
			Back to INDEX		MSDS
			Top of Page		Technical Data Sheet (pdf)
			A premium quality alkyd primer for use as an undercoater, sealer or stain blocking primer. Formulated for suppressing most bleeding type stains including: crayon, graffiti, grease marks, water stains; cedar and redwood bleed, asphalt, creosote, rust stains, and smoke. This all purpose primer can be used over oil or latex paint and performs equally well under all Benjamin Moore & Co. architectural finish coat products.
			Colors Available:			Use	Interior/Exterior
						Gloss Level	Flat
			White*
						Type	Alkyd
						Clean Up With	Mineral Spirits